 |
Mold Frames
Made of high quality aluminum alloy for holding model and uncured rubber when vulcanizing. To be used in conjunction with mold frames and sprue formers.1. Single estruded 1-7/8" x 2-7/8" opening. comes in 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2"
2. 2 Cavity Mold Frame comes in 5/8" x 1-7/8" x 2-7/8", 3/4" x 1-7/8" x 2-7/8", 1" x 1-7/8" x 2-7/8"
3. Oversized Single Mold Frames comes in 4" x 2-1/2" x 1" thick, 4" x 2-1/2" x 1-1/2" thick, 5" x 3-1/2" x 1" thick, 5" x 3-1/2" x 1-1/2" thick, 6" x 4" x 1" thick, 6" x 4" x 1-1/2" thick
4. 4 Cavity Mold Frame comes in 1-7/8" x 2-7/8" and 5/8" thick or 1" thick.
item #1 - 4
|
 |
Mold Frame Plates Sturdy metal plates used to place over mold frame when vulcanizing uncured rubber. Comes in 2-1/2" x 3-3/4" x 1/8" thick, 3" x 4-1/2" x 1/8" thick, 4" x 6" x 1/8" thick, 5" x 7" x 1-1/2" thick.
item #5
|
 |
3 Part Mold Frames This unique frame, is comprosed of 3 parts, which allows the user to custom design a mold frame to meet any possible need. Easy to change.
item #6
|
 |
Rubber Mold Vulcanizer Used to compress mold frames and rubber and heat to correct vulcanizing temperature. Space saving design allows the use of the largest mold frames. Temperature control ranges from 100ºF to 400ºF. Platens measure 8" x 5". Comes in 110 volt or 220 volt.
item #7
|
 |
ABC Vulcanizer
Now you can vulcanize rubber in any oven, even a toaster oven. No expensive vulcanizer needed. Heavy aluminum plates distribute heat evenly. Maximum mold frame size 4" x 5" x 1-1/2">
item #8
|
 |
Mold Cutting Blades High quality English Swan Morton blades, individually wrapped.
09. style #11
10. style #12
item #9 - 10
|
 |
Knife Handle For Mold Cutting Blades 11. stainless steel
12. plastic
item #11 - 12
|
 |
Mold Frame Clamp Used to hold rubber molds for wax injecting. Especially useful when producing multiple wax models from the same mold. Special release allows for quick attachment and release.
item #13
|
 |
Mold Spreader Extra heavy duty, powerful device allows the user to use two hands when cutting rubber molds. Automatically pulls apart the mold as the user cuts the rubber.
item #14
|
 |
15. Rubber Mold Sprue Burning Mandrel Eliminates the need for a sprue former. Simply heat this unique tool to burn a sprue opening in a rubber mold. 16. Sprue Former Used to make the opening in the mold for injecting wax from nozzle of was injector 9/16" diameter.
item #15 - 16
|
 |
17. Ferris See Thru Mold Compound Oven cures to a clear transparent extremely flexible rubber. 1 quart or 1 gallon. 18. See Through Mold Frames For use with pour type mold compounds. 2" wide, 3" long. 3/4" thick or 1" thick.
item #17 - 18
|
 |
Pre-Vest Investment All new formulation has a defoamer blended right into the investment. Allows a wider water usage and gives a low rise when vacuuming, a more free flowing mix and easier removal of air bubbles on wax patterns. Easy breakoug, exact details can be reproduced. A superior quality cristobalite investment mold material for casting of jewellery metals melting at 1200ºF or less. Comes in many different sizes. Gem Deox investment, allows the caster to set stones prior to casting.
item #19
|
 |
Powdered Investment Remover Made to remove investment and acts as a pickling agent to remover oxides which form on casting surfaces.
item #20
|
